Wood activated carbon

PRODUCTS > Material activated carbon series > Wood activated carbon

Wood activated carbon

Product introduction:

This product adopts high quality wood chips, coconut shell, etc. As raw materials, after crushing, mixing, extrusion, molding, drying, carbonization, activation and made of columnar activated carbon ash than the traditional coal columnar carbon lower, less impurities, CTC absolute advantage. Mainly used for 1, gas phase adsorption 2, organic solvent recovery (benzene series gas toluene, xylene, acetate industry acetone recovery, viscose staple fiber maintenance CS2 recovery, etc.) 3, impurities and harmful gas removal, the technology reached the first-class level in China. Ordinary 4mm activated carbon, CTC adsorption is up to 60%, not more than 70%, and the company produced 4mm wood columnar activated carbon adsorption rate of CTC up to 100%, make up for the lack of domestic CTC adsorption rate vacancy, reached the international first-class level! Completely replace imported products.


Product originality:

Adopt non-bonded molding activated carbon proprietary technology. Change the traditional coal tar, starch and other traditional binder molding methods. Does not contain the binder component, completely depends on the affinity between the carbon molecules and the special nature of the raw material itself. Scientific formula, made, effectively avoid carbon hole blocking, give full play to rich and developed carbon hole adsorption function

Product advantages:

1. The service life is 4-5 times that of ordinary coal activated carbon.

2. High adsorbability and desorption, thus greatly improving the solvent recovery.

3. High strength and low ash content, reasonable aperture distribution.

4. High cost performance, suitable for this site organic gas recycling.

5. High ignition point and safe use.

Comparability of products:


Name

CTC

Ash

Proportion

Mesh

Wood columnar charcoal

  

120%

3%

0.35

φ1mm - φ4mm 

Coal columnar charcoal

50%

15% 

0.5

φ1mn - φ4mm 


Product suitability:

(1) gas phase adsorption (2), organic solvent recovery (benzene gas toluene, xylene, acetic acid fiber industry acetone recovery) (3), impurities and harmful gas removal, waste gas recovery (4), refinery, gas station, oil depot excessive gasoline recovery.