Cellular activated charcoal

Honeycomb activated carbon is widely used in various kinds of organic waste gas purification systems with low concentration and large air volume. Treated waste gas by waterproof model when the square hole can fully contact with activated carbon, activated carbon adsorption efficiency can reach 67.16%, small wind resistance coefficient, excellent adsorption, stripping and gas dynamics performance, can be widely used in purification treatment containing toluene, xylene, benzene, benzene, phenol, such as lipids, alcohols, aldehydes, organic gases, stench gas and all kinds of gas containing trace metals. The use of waterproof activated carbon environmental protection equipment waste gas treatment purification efficiency is high, adsorption bed volume is small, the equipment energy consumption is low, can reduce the cost and operation cost, the purified gas fully meet the requirements of environmental protection emissions.

Activated carbon performance parameters: divided into two, water resistance and water resistance, all indicators parameters are the same, specifications can be produced according to customer requirements. Conventional 100 * 100 * 100 mm, 50 * 50 * 100 mm

Waterproof activated carbon

Waterproof activated carbon USES:

Exhaust gas treatment for food, chemical, industrial, airport, shipyard, electronics, automobile, pharmaceutical, medical, industrial buildings, large theaters and other public places. Activated carbon technical index:

Main ingredient: activated carbon

Gauge: 50X50X100 100X100X100mm

Hole density: 50-300 holes /in2

Body density: 0.3-0.55g/ml

Benzene absorption rate: > 20%

Desorption temperature: < 120℃

Air speed of empty tower: bed thickness: 600mm; resistance: 490Pa; 0.8m/s

Positive compressive strength: 0.8mpa

Service life: 4 years

Special material and size can be customized according to customer requirements.

1. Characteristics of activated carbon product

Waterproof activated carbon has a relatively large area, microporous structure, high adsorption capacity, high surface activated carbon products, in the air pollution treatment is widely used. Water-proof activated carbon adsorption method is selected, that is, waste gas contact with porous activated carbon with a large surface, pollutants in the waste gas are adsorbed and decomposed, thus playing a purification role. With waterproof activated carbon can be different degrees of removal of pollutants: nitrogen oxide, carbon tetrachloride, chlorine, benzene, diformaldehyde, acetone, ethanol, ethyl ether, methanol, acetic acid, ethyl ester, styrene, phosgene, odor gas. Modified waterproof activated carbon impregnated with chemical reagent can remove: acid fog, alkali fog, amine, mercaptan, sulfur dichloride, hydrogen sulfide, ammonia, mercury, carbon chloride, dioxins, etc.

It is better to use waterproof activated carbon to control air pollution. It is composed of two adsorbers in parallel, which can be used to deal with intermittent exhaust and continuous exhaust. One adsorber can be used for adsorption, and the other adsorber can be used for desorption regeneration, and the desorbed pollutants can be discharged after catalytic combustion. Use waterproof activated carbon to avoid high temperature as far as possible, because high temperature will reduce the adsorption, adsorption effect will fall because of the rise in temperature. At the same time to avoid the high dust content in the gas, because the tar dust fog will block activated carbon fine hole, increase wind resistance, reduce the adsorption effect, in this case, in front of the waterproof activated carbon installed dust filter device, in order to improve efficiency and service life.

3 ingredient activated carbon, activated carbon technology parameters of normal compressive strength is greater than 0.8 MPa commonly used specifications 50 * 50 * 100 mm, 100 * 100 * 100 mm bore temperature less than 400 degrees Celsius density of 100 per square inch, 150 holes per square inch of empty tower wind speed 0.8 m/s specific surface area more than 700 square/g appearance product surface smooth, no cracks note: other specifications can be produced according to the requirements of customers.